Shandong Chuangxin Building Materials Complete Equipments Co., Ltd

منزل
المنتجات
حول بنا
جولة في المعمل
ضبط الجودة
اتصل بنا
طلب اقتباس
منزل المنتجاتWall Panel Making Machine

Double Drive Double Roller Extruding Sandwich Panel Making Machine , Wall Panel Roll Forming Machine

Double Drive Double Roller Extruding Sandwich Panel Making Machine , Wall Panel Roll Forming Machine

    • Double Drive Double Roller Extruding Sandwich Panel Making Machine , Wall Panel Roll Forming Machine
    • Double Drive Double Roller Extruding Sandwich Panel Making Machine , Wall Panel Roll Forming Machine
    • Double Drive Double Roller Extruding Sandwich Panel Making Machine , Wall Panel Roll Forming Machine
  • Double Drive Double Roller Extruding Sandwich Panel Making Machine , Wall Panel Roll Forming Machine

    تفاصيل المنتج:

    Place of Origin: CHINA
    اسم العلامة التجارية: chuangxin
    إصدار الشهادات: ce
    Model Number: XD-D

    شروط الدفع والشحن:

    Minimum Order Quantity: 1 sets
    الأسعار: negotation
    Packaging Details: packing
    Delivery Time: 30 days
    Supply Ability: 10 sets per month
    ﺎﺘﺼﻟ ﺍﻶﻧ
    مفصلة وصف المنتج
    Production capacity: 2000sqm Warranty: 1 years
    Automatic grade: Automatic

    Double Drive Double Roller Extruding Sandwich Panel Making Machine , Wall Panel Roll Forming Machine
     
    XD-DB Full Automatic Sandwich wall board Production line,Wall Panel Making Machine,wall board
     
     (II) Feature
    1. Anti-earthquake with light quality: In view of its weight per unit area is only 1/10 of red brick wall, the product has good anti-earthquake performance. It can be used at low-rise building and high-rise building, and it is preferred to be used at workshop with steel frame structure. It can replace the color steel plate with its better performance.
    2. Fast and convenient operation: It can be installed by board or combination with the dry method, and the product can be nailed, cut, planed, drilled and sticked. 
    3. Low comprehensive cost: The product is made of agricultural and industrial wastes, so the production cost is low. With the low load of girder and short construction period, it can reduce over 20% of engineering cost after compared with solid brick and hollow brick.
    4. Energy-saving and environmental protection: The production processing need no high temperature and high pressure. Being a green environmental-protection energy-saving building materials, the product has no toxicity, harm, pollution and radioactivity.
    5. Increasing the usage area: Under the same condition of heat-preserving and sound insulation, with the thinner plate, the product can increase over 10% usage area after compared with the same building.
    6. Having the following features: fireproofing, water-proof, anti-impact, acid & alkali resistant and anti-aging.
    IV. Production Conditions
    Wall board production line has workshop and raw material warehouse. Workshop: over 300m2-800 m2, worker: 10-16 person; fresh water; electricity:8-20KW
    V. Benefit Analysis
     (I) Cost accounting
    Raw material: 19-25 Yuan/ m2 (according to different thickness); Wage: 1 Yuan/ m2
    Water-electricity fee: 0.5 Yuan/ m2; Depreciation of the equipment: 0.2Yuan; Management fee: 1 Yuan/ m2
    Total: 21.7 Yuan~27.70 Yuan/ m2
     (II) Profit analysis: (Take the small-scale equipment as example), production: 800 m2 per day, at the price of 58 Yuan/ m2 to sell, and then the profit per day is that 800 m2 ×58 Yuan/ m2-800 m2×21.7~27.70=29040~24240 Yuan.
    V. Attention

     

    I   Equipment Feature

     This machine adopts the technology of double-drive double-roller-extruding, and the product is formed once after sizing, material feeding, spreading

     no-woven cloth, compounding and repressing. The equipment runs stably with high

     automatic degree, and the specification of its product can be adjusted arbitrarily. 

    The equipment actually realizes the industrial production-line of new model building

     wall board, and the product have even and glazed surface with high compactness. 

    The equipment largely reduces the labor intensity of worker and thoroughly 

    changes many shortages of the former casting forming with upright mould or flat

     mould, such as large mould usage, low recycling rate, required electrical heating 

    or steam heating, single kind of product as well as the sound insulation and 

    heat-preserving which don’t meet the market requirements.

     

    II Project Feature

      Double Drive Double Roller Extruding Sandwich Panel Making Machine , Wall Panel Roll Forming MachineDouble Drive Double Roller Extruding Sandwich Panel Making Machine , Wall Panel Roll Forming Machine

    1. The source of the production raw materials is widely with no regional restriction.

     The product is made of sawdust, straw (rice hulls), many kinds of crop straw and

     inorganic material (such as talcum powder, infusorial earth and powder coal ash)

     after special technology. So this project have low production cost, small investment 

    and fast effectiveness.

     

    2. The equipment has high automatic degree, simple production technology, low 

    labor intensity and production line, and there is no noise and three-wastes (waste water, waste gas and waste residue) during production.

     

    3. Low production energy consumption. With the influence of chemical reaction, it 

    can meet the requirements about production technology without high temperature 

    and high pressure.

    Product Feature and Performance

    Performance

     

    1

    Air-dry density

    ≤ (Standard index)50kg/m2

    (Test Value) 30.0kg/ m2

    2

    Drying shrinkage

     rate of the board

    ≤0.08%

    0.015%

    3

    Anti-breaking load

    ≥1400N

    5640N

    4

    Anti-impact

    No breakage phenomenon

     such as cracking after

     three impacts

    No breakage 

    phenomenon

     such as cracking after

     three impacts

    5

    Thermal resistance 

    of main section (T=90mm)

    ≥1.35(m2.k)/w

    ≥1.36(m2.k)/w

    6

    Thermal bridges area ratio

    ≤8%

    2.22%

    7

    Sound insulation Index

     

    36dB

    8

    Radioactivity

     

    None

     

       

     


    III  Feature

     1. Anti-earthquake with light weight: In view of its weight per unit area is only 1/10 of red brick wall, the product has good anti-earthquake performance. It can be used at low-rise building and high-rise building, and it is preferred to be used at workshop with steel frame structure. It can replace the color steel plate with its better performance.

    2. Fast and convenient operation: It can be installed by board or combination with the dry method, and the product can be nailed, cut, planed, drilled and stuck.

    3. Low comprehensive cost: The product is made of agricultural and industrial wastes, so the production cost is low. With the low load of girder and short construction period, it can reduce over 20% of engineering cost after compared with solid brick and hollow brick.

     4. Energy-saving and environmental protection: The production processing need no high temperature and high pressure. Being a green environmental-protection energy-saving building materials, the product has no toxicity, harm, pollution and radioactivity.

    5. Increasing the usage area: Under the same condition of heat-preserving and sound insulation, with the thinner plate, the product can increase over 10% usage area after compared with the same building.

     6. Having the following features: fireproofing, water-proof, anti-impact, acid & alkali resistant and anti-aging.

      

     

    تفاصيل الاتصال
    Shandong Chuangxin Building Materials Complete Equipments Co., Ltd

    اتصل شخص: Mr. Kevin

    إرسال استفسارك مباشرة لنا (0 / 3000)

    منتجات أخرى